OEM/ODM Supplier Bi Metal Rivet Maker – Solid Contact rivet – ZHJ
China OEM/ODM Supplier Bi Metal Rivet Maker - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ Detail:
Solid rivets present a larger challenge when de-riveting. The manufactured head must be ground or milled off prior to pushing the rivet back through the hole. When removing solid rivets, the material of the component surrounding the hole must be considered. If the material is softer than the rivet, there is a chance it will be damaged. If the hardness is equal to or harder than the rivet the risk of damage is lower, as it will maintain its shape while the softer rivet is pushed back through. How the rivet was initially formed also plays a role in the de-riveting process. The larger the shank swell created in the forming process, the higher the risk of damage to the surrounding component.
Process flow
Rivet Making
Annealing
Finishing
Inspection
Drawing
Packing
Measure
|
Item |
Head diameter D（mm） |
Head thickness T(mm) |
Foot diameter d(mm) |
Foot length L（mm） |
Sphere radius R（mm） |
| Basic dimension |
1.2~12 |
0.15~3.00 |
0.75~6.00 |
0.45~8.56 |
1.2~40 |
| tolerance |
±0.05 |
－0.02∽ |
－0.02∽ |
±0.05 |
±2 |
Product detail pictures:
Related Product Guide:
We have been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for China OEM/ODM Supplier Bi Metal Rivet Maker - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: Cannes , Gabon , Albania , We always hold on the company's principle "honest, professional, effective and innovation", and missions of: let all drivers enjoy their driving at night, let our employees can realize their value of life, and to be stronger and service more people. We are determined to become the integrator of our product market and one-stop service provider of our product market.
By Claire
from Rotterdam
- 2017.05.02 11:33
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Danny
from Serbia
- 2018.09.29 13:24
