Hot sale Silver Bimetal Contact Rivets – Solid Contact rivet – ZHJ
China Hot sale Silver Bimetal Contact Rivets - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ Detail:
Solid rivets present a larger challenge when de-riveting. The manufactured head must be ground or milled off prior to pushing the rivet back through the hole. When removing solid rivets, the material of the component surrounding the hole must be considered. If the material is softer than the rivet, there is a chance it will be damaged. If the hardness is equal to or harder than the rivet the risk of damage is lower, as it will maintain its shape while the softer rivet is pushed back through. How the rivet was initially formed also plays a role in the de-riveting process. The larger the shank swell created in the forming process, the higher the risk of damage to the surrounding component.
Process flow
Rivet Making
Annealing
Finishing
Inspection
Drawing
Packing
Measure
|
Item |
Head diameter D（mm） |
Head thickness T(mm) |
Foot diameter d(mm) |
Foot length L（mm） |
Sphere radius R（mm） |
| Basic dimension |
1.2~12 |
0.15~3.00 |
0.75~6.00 |
0.45~8.56 |
1.2~40 |
| tolerance |
±0.05 |
－0.02∽ |
－0.02∽ |
±0.05 |
±2 |
Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for China Hot sale Silver Bimetal Contact Rivets - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: Niger, Brunei, Costa rica, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Sabina from Mauritania - 2018.06.30 17:29
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Gabrielle from Bulgaria - 2017.02.18 15:54
