Cheap PriceList for Stamping Contact – Electrical Contact Tips – ZHJ
China Cheap PriceList for Stamping Contact - Electrical Contact Tips - ZHJ Manufacturer and Supplier | ZHJ Detail:
Product features：
Silver cadmium oxide electrical contact material is widely used, the low melting point of contact in contacts of sublimation can make the cooling surface of contact, and at the same time quenching effect, prevent contact burning.
AgSnO2, AgSnO2In2O3 contact has the advantages of high hardness, high resistance to fusion welding and resistance to burning etc..
The material is the best environmental protection material to replace AgCdO.
| Application: |
| Contactors, circuit breakers, thermostats, intelligent switches, etc |
| The Material: |
| AgZnO , AgSnO2 , AgCu , AgCuO , AgCdO , AgNi , AgSnO2In2O3 , AgSnO2/Cu , AgCdO/Cu etc. |
| matriral | Wt% | G/cm3 | μΩ.cm | Mpa | % | HV:KGF/MM2 |
| AgCdO10 | 90 | ≥10.1 | ≤2.10 | ≥260 | ≥15 | ≥50 |
| AgCdO10 | 88 | ≥10.0 | ≤2.2 | ≥260 | ≥12 | ≥60 |
| AgCdO10 | 85 | ≥9.85 | ≤2.3 | ≥260 | ≥10 | ≥65 |
| AgCdO10 | 83 | ≥9.8 | ≤2.4 | ≥260 | ≥8 | ≥65 |
| AgSnO2（8） | 92 | ≥9.9 | ≤2.3 | ≥250 | ≥17 | ≥70 |
| AgSnO2（10） | 90 | ≥9.8 | ≤2.3 | ≥250 | ≥15 | ≥75 |
| AgSnO2（12） | 88 | ≥9.7 | ≤2.4 | ≥260 | ≥12 | ≥80 |
| AgSnO2（5）In2O3（3） | 92 | ≥9.9 | ≤2.3 | ≥250 | ≥17 | ≥75 |
| AgSnO2（5）In2O3（4） | 90 | ≥9.8 | ≤2.4 | ≥250 | ≥17 | ≥80 |
| AgSnO2（5）In2O3（4） | 88 | ≥9.7 | ≤2.5 | ≥260 | ≥12 | ≥85 |
Main Processes:
smelting
extrusion
hot rolling
cold rolling
Inspecting packing
surface treatment
Internal oxidized
stamping
Main Application
Product detail pictures:
Related Product Guide:
We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for China Cheap PriceList for Stamping Contact - Electrical Contact Tips - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: Bangladesh , Indonesia , United Arab emirates , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Elsa
from Honduras
- 2018.02.21 12:14
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Yannick Vergoz
from Poland
- 2018.06.21 17:11
